Need to shorten some sleeves

Come brag about your latest DIY, or teach us how to do something new.
Post Reply
User avatar
MackerelCat
Posts: 1704
Joined: Thu Aug 27, 2015 9:44 pm

Need to shorten some sleeves

Post by MackerelCat » Thu Dec 28, 2017 10:34 am

DH has three nice dress shirts that he tore the elbow out of. I mended them and he ripped them out again! I think there's some sharp edge at his workstation that's snagging his shirts, as it hasn't happened since he started wearing a heavy sweater.

I want to shorten the sleeves of these damaged shirts to make them short-sleeved, but since DH never wears short sleeves, I have no idea what length to cut them off at. If anyone here has a large men's short-sleeved dress shirt, could you measure the sleeve length on the inside seam and let me know?

Thanks!

(I will shorten the sleeves and then see if DS can wear the shirts. If they don't fit him, I will donate them. They are in great shape aside from the ripped elbows.)
Mackie

User avatar
LWolfT
Posts: 1345
Joined: Fri Aug 28, 2015 10:46 am

Re: Need to shorten some sleeves

Post by LWolfT » Tue Jan 02, 2018 10:29 am

Mackie, a quick measure of a couple of DH's shirts showed 7 inches from the inside seam (10 inches from the top shoulder seam). That's after hemming.
If your DS is agreeable to wearing them, you might see if he'll try one one and let you check the length ... I know DH doesn't like his short sleeves too "long."

User avatar
MackerelCat
Posts: 1704
Joined: Thu Aug 27, 2015 9:44 pm

Re: Need to shorten some sleeves

Post by MackerelCat » Tue Jan 02, 2018 3:02 pm

Oh, thank you! I think I will trim and pin up the hems to 7 inches and then have DS try them on. Short sleeves that hit the elbow crease are annoying, so that's something I'll check for.
Mackie

gaylejackson2
Posts: 1066
Joined: Tue Sep 08, 2015 1:13 pm
Location: Utah

Re: Need to shorten some sleeves

Post by gaylejackson2 » Sun Jan 07, 2018 1:54 am

MackerelCat wrote:
Tue Jan 02, 2018 3:02 pm
Oh, thank you! I think I will trim and pin up the hems to 7 inches and then have DS try them on. Short sleeves that hit the elbow crease are annoying, so that's something I'll check for.
If you haven't already shortened his sleeves, you could also have him put on his shirt, inside out, then have him show you where he wants the finished edge of the sleeve to be.

Any time I have had to alter (and I used to alter lots of people's clothing) clothes, I'd have the owner put it on inside out so I could mark the new hem with pins.

User avatar
MackerelCat
Posts: 1704
Joined: Thu Aug 27, 2015 9:44 pm

Re: Need to shorten some sleeves

Post by MackerelCat » Sun Jan 07, 2018 11:43 am

That is brilliant, Gayle. I have not yet cut the sleeves off, so that will work great.
Mackie

frugalaaron
Posts: 100
Joined: Fri Aug 22, 2014 11:08 pm
Contact:

Re: Need to shorten some sleeves

Post by frugalaaron » Sun Jan 07, 2018 11:47 am

How about having him put on a nice-fitting t-shirt underneath it? It might allow you to figure out where to make your cuts. Just be sure to add an inch or two for hemming before getting scissor happy.

Post Reply